You can locate SeaCOM 3.6.17 for Windows XP here.
What is the difference between positive and negative logic in digital I/O circuits?
“When a circuit requires logic 1 to operate, engineers may refer to this condition as positive logic. Thus, the more positive voltage causes the action…
Do you have a LabView driver for Sealevel SeaI/O or eI/O devices?
We recommend using Sealevel SeaI/O and eI/O devices with LabView in combination with one of the available options to give LabView the ability to communicate…
What programming languages can I use with SeaMAX for Windows to control Sealevel SeaI/O and eI/O digital and analog I/O devices?
SeaMAX for Windows provides both a .NET DLL and a native DLL with nearly identical capability to control these device types. The .NET DLL should…
FAQ: Can the electromechanical relays on the SeaConnect 370 reliably switch a micro-current signal after switching a medium load?
No, they cannot. Medium loads wear through the contacts’ gold plating, which is what enables the micro-current switching capability. Beneath the gold plating is a…
FAQ: What’s unique about the relays used on the SeaConnect 370?
The new Sealevel SeaConnect 370s incorporate innovative Form C electromechanical relays with gold-plated bifurcated contacts. These relays provide lower initial contact resistance and greater initial…
Can I use a PCI or PCIe serial port as a replacement for COM1?
Using Sealevel’s COM Port Manager utility provided with our SeaCOM software suite, a PCI or PCIe serial port can be named “COM1.” After that is…
Can I use Sealevel synchronous serial adapters with Linux?
Sealevel SeaMAC software is used to enable Linux support for products which feature the Zilog® Z85230 Enhanced Serial Communications Controller (ESCC). Our Route56 software package…