What do I do if my Ethernet or Wireless SeaI/O module starts up with a strange IP address?

All Ethernet (E-series) and Wireless (W-series) SeaI/O modules are shipped with DHCP enabled. If no DHCP server is available or the DHCP server cannot be reached, Ethernet SeaI/O modules default to a random IP address in the range 169.254.x.x. Wireless SeaI/O modules default to a random IP address in the range 192.168.0.x. Change the PC’s network settings to place both the SeaI/O module and PC on the same subnet. Adjust the SeaI/O module’s IP address and Netmask using the Ethernet Config utility (Start > All Programs > Sealevel SeaMAX > Ethernet Config) installed with SeaMAX. Then restore the PC’s network settings.

Resources

Recent FAQs

  • How do I troubleshoot my 12010 COM Express Compact Type 6 Carrier Board?
  • What should I do if my Sealevel USB Hub is not functioning correctly?
  • RoHS and REACH Compliance, and PFAS Statement
  • What do I do if an eI/O device is unresponsive?
  • How can I reduce the latency of a SeaI/O device?

    • Subscribe to our e-Newsletter

    Subscribe