Description
Control and monitor four optically isolated inputs via any 10/100BaseT Ethernet connection with the eI/O-130E digital I/O module. Inputs can range from 5-30VDC and provide 3500VDC (2500VAC RMS) isolation to ground. Each pair of inputs share a common for easy field wiring via removable 3.5mm terminal blocks.
The eI/O-130E receives power via a removable spring-clamp terminal block. The lever-style clamping mechanism requires no tools, which simplifies field installation. The module is powered by your 9-30VDC source, or select from a variety of Sealevel power supply options.
Ready for DIN rail mounting, the eI/O-130E includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.
Communicate with eI/O Ethernet digital I/O modules using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.
The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development. The Sealevel Mod+ Connect app is an easy-to-use diagnostic utility that allows you to monitor, test and troubleshoot Sealevel eI/O and SeaI/O modules using your iPhone or iPod touch.
AdQue –
Great product that worked exactly as presented.
The 130E software and hardware were simple to install, worked exactly as presented and expected. There were no surprises. Documentation was very good.
Beerboy1953 –
Fit the bill for my application.
The 130E does what it says. I attached a PIR and the 130E sets the bit chosen and puts it out there on my LAN and my application can read it with no trouble. I chose this model because I didn’t need any relay contacts for external devices. This is now an integral part of my IP camera monitoring system.
Matt –
Great Support & API
I had no problem getting the 130-E up, running, and integrated into our company’s DAQ suite – excellent software design and great tech support over the phone. Would highly recommend!