Sealevel Systems, Inc. was selected to design and manufacture docking stations for VT Miltope’s At-Platform Automatic Test Systems (APATS) Integrated Family of
… View More
Resource Center
Browse Categories
Interfacing Analog Signals to SeaI/O-570 Modules
Mar 10th 2011
OverviewThe SeaI/O-570 A/D inputs can measure signals from a variety of sensors including accelerometers, flow meters, photocells, strain gauges and thermist
… View More
Software: WinSSD Diagnostic Utility – Windows
Mar 10th 2011
This is the standalone version of the Sealevel WinSSD diagnostic utility that is included in our SeaCOM, SeaLINK, and SeaMAC software packages.WinSSD is a full featur
… View More
OverviewThis condition is potentially encountered in Microsoft Windows when connecting a serial GPS device to a serial port. It is caused when the NMEA 0183 GPS
… View More
Yes. Please include your account number in the ‘Special Instructions’ field and we will bill the freight charges to your account. The ‘Specia
… View More
All Sealevel TTL Digital I/O products are configured to power up in input mode by default. This ensures that no outputs are inadvertently activated.
… View More
Software: R9 Development SDK – Windows
Feb 24th 2011
R9 development software for the Sealevel R9 family of embedded RISC computers. Includes the Sealevel Talos .NET Framework for Windows.Supported on development systems
… View More
Manual: SeaPAC R9-8.4 User Manual
Feb 24th 2011
Downloads:
SeaPAC R9 8.4 User Manual
Size: 4.79 MB Type: pdf
Article Specifications:
Related Models: S91100-8R, S91200-8R
SeaPAC R9-8.
… View More
Enhanced SeaLINK Ethernet Serial Software Available
Posted by Josh Killinger on Feb 15th 2011
A new, enhanced version of Sealevel’s SeaLINK software, supporting the Sealevel family of Ethernet to serial devices, has been released. The SeaLINK V5 driver
… View More
Why does the mouse cursor randomly jump around when I connect a GPS to a Sealevel serial adapter?
Feb 2nd 2011
You are describing the “crazy mouse” syndrome, a common condition when Microsoft Windows receives NMEA 0183 data from a serial GPS device. The conditio
… View More
The Zilog 16C32-based 3514 and 5104 have 256 K of memory on the adapters that are used for buffering the input and output data. To aid in transfer efficiency, the Wi
… View More
The SBC-R9 has eight analog inputs with an effective bandwidth of 1.23 kHz divided across all eight analog inputs. The A/D device specifies a maximum sampling fr
… View More
The Z16C32 operates similar to a UART and transmits the least significant bit first. The only exception is when the card is operating in SDLC/HDLC mode wit
… View More
Sgt. Samuel Davis, Congressional Medal of Honor Recipient
Posted by Bryan Buchanan on Jan 31st 2011
I’ll never forget my first trip to Special Operation Forces Industry Convention (SOFIC) in June 2009. It was held at the Tampa Convention Center located in bea
… View More
Firmware: SeaLINK (Ethernet)
Jan 21st 2011
Please refer to the SeaLINK User Manual or contact Sealevel technical support for instructions on updating the firmware on your SeaLINK Ethernet serial hardware.Do y
… View More
Custom Design: The Challenge is as Satisfying as the Solution
Posted by Earle Foster on Jan 10th 2011
Sealevel is well known for our off-the-shelf serial and digital I/O solutions. The wide variety of products we offer means that most customers are able to order
… View More
The ITU document O.153 paragraph 2.1 indicates the BERT pattern can be used at data rates up to 14.4 Kbps. However, the Sealevel WinSSD utility allows the B
… View More
What CRC-CCITT value is used by Sealevel synchronous serial adapters with the Zilog Z85230?
Dec 29th 2010
The CRC-CCITT polynomial value used in the Zilog Z85230 is:x16 + x12 + x11 + x10 + x8 + x3 + x2 + x1 + 1The corresponding hexadecimal value is 0x1D0F.
… View More