How do I access the BIOS menu for my 12000-KT COM Express Type 6 carrier board?

To access the BIOS menu for the 12000-KT COM Express Type 6 carrier board, follow the steps below.

1. Attach a USB keyboard to the computer.
2. Apply power and immediately press and hold the Delete key  for 15 seconds. This will ensure the computer has had time to boot and enter the BIOS.
3. Press the F9 key to load Optimal Defaults. Then, press the Enter key to validate the change.
4. Press the following key pattern:
   • Right arrow
   • Enter
   • Down arrow 9 times
   • Enter
   • Up arrow
   • Enter
   • F10
   • Enter
5. If performed properly, the DDI1 setting will have been restored to DisplayPort, the BIOS settings were saved to flash memory and the computer was rebooted. The display should now be working. If this does not work, contact Sealevel Systems Technical support.
6. Once the computer has rebooted and video is working, it is a good idea to disable the LVDS flat panel interface. It was enabled by restoring “Optimal Defaults.”
7. Enter the BIOS, go to the Graphics section, and change the “Active LFP” setting to “No LVDS.”
8. Change the “Power Loss Control” setting to “Turn On” (or the setting that is appropriate for your application environment).
9. Press the F10 key to save settings and exit.