SeaRAQ 8 Channel Isolated Differential A/D Inputs

Part: 6513   Model: SeaRAQ-6513

Call for price

Need some help? Contact us

Description

SeaRAQ™ I/O expansion modules provide unprecedented expansion capabilities for the Sealevel Relio R3 and Relio R4 industrial computers. The SeaRAQ 6513 provides eight general-purpose 16-bit A/D channels. Each channel can be individually software-configured for +/- 10 VDC, +/- 5 VDC, +/- 1 VDC, +/- 0.5 VDC, +/- 0.15 VDC, as well as 0-25 mA current mode. For maximum protection from damaging external voltages commonly found in industrial environments, the 6513 expansion board includes 1500 VAC of field-to-logic isolation.

The current loop receiver inputs are ideal for interfacing a wide variety of industrial process control and test equipment that use 4-20 mA signaling. The 4-20 mA standard remains a popular method for signal transmission in harsh environments, even over long distances. Current loop has a low sensitivity to electrical noise and is not affected by signal loss over cable runs or interconnections. For easy, reliable field wiring, the board uses removable, high-retention terminal block connectors.

Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Communicate using industry-standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Category:

Additional information

A/D Inputs

8 Differential Analog Inputs

A/D Range

+/- 10 VDC, +/- 5 VDC, +/- 1 VDC, +/- 0.5 VDC, +/- 0.15 VDC, 0-25 mA (Software Configurable)

A/D Resolution

16-bits

Analog I/O

A/D Inputs

Family

SeaRAQ

Dimensions

PCB is 6.00" (L) x 4.35" (W)

Extended Temperature

Call for Options

Field Wiring

16 – 30 AWG

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Input Isolation

1500 VAC RMS (Field-to-Logic)

Input Impedance

>10 Mohm (Voltage), 200 Ohms (Current)

Modbus

Modbus RTU

Operating Temperature

0°C to 70°C (32°F to 158°F)

Plate Connectors

High-Retention, Removable Terminal Blocks

RoHS Compliant

Yes

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • General purpose A/D expansion module with eight (8) 16-bit, differential inputs
  • 1500 VAC field-to-logic isolation
  • Each input can be individually configured for +/- 10 VDC, +/- 5 VDC, +/- 1 VDC, +/- 0.5 VDC, +/- 0.15 VDC, as well as 0-25 mA current loop
  • Industry standard Modbus RTU interface
  • Input power provided via backplane connector
  • Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
  • Includes 20-position, removable, high-retention Phoenix terminal blocks
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

Windows Software

Software: SeaMAX - Windows

Reviews

There are no reviews yet.

Be the first to review “SeaRAQ-6513”

Your email address will not be published. Required fields are marked *